Email:cnfuruide@gmail.com Henan Friend Metal Products Co.,Ltd

Henan Friend Metal Products Co.,Ltd

Methods Of Improving The Service Life Of Carbon Spring Steel Wire

Methods of Improving the Service Life of Carbon Spring Steel Wire
Carbon spring steel wire is widely used in all aspects of life, mechanical production, aerospace, batteries, electronic equipment. In order to improve the service life of these devices, then it is necessary to improve the life of Carbon Spring Steel Wire, then how to improve the life of Carbon Spring Steel Wire?
1, select the appropriate Carbon Spring Steel Wire
There are many types of carbon spring steel wire, different types of carbon spring steel wire use of the occasion is not the same, if the wrong choice of carbon spring steel wire quality, then the service life will be greatly reduced.
2, the maximum load of Carbon Spring Steel Wire
The Carbon Spring Steel Wire has a maximum load, ie the load, if the maximum load will damage the spring so that the spring can not be restored to normal size, causing damage to the spring.
3, the main prevention and treatment of corrosion
We insist on the serious corrosion of the Carbon Spring Steel Wire, so the Carbon Spring Steel Wire to the main corrosion, to avoid damage caused by corrosion of the spring. The effective way to avoid corrosion is to choose corrosion-resistant carbon spring steel wire, such as galvanized, stainless steel, etc., there is to avoid in the humid environment, moisture and oxygen are the most important conditions for corrosion of carbon spring steel wire.
4, the necessary maintenance
The necessary maintenance is also very important, the necessary to add lubricants, etc., to reduce the friction of Carbon Spring Steel Wire, but also to improve the life of Carbon Spring Steel Wire an important way.
Mattress Carbon Spring Steel Wire can also be classified according to the manufacturing process, such as raw rubber spring steel wire (before drawing without lead bath quenching), lead quenching carbon spring steel wire, galvanized carbon spring steel wire, oil quenching Carbon Spring Steel Wire.
Mattress carbon spring steel wire in accordance with the different use of spring, do the spring required carbon spring steel wire has many types, require a lower general use for mattress springs, but the mattress Carbon Spring Steel Wire tempering is also essential, Here to tell you about the mattress Carbon Spring Steel Wire for tempering purposes.
1, through the Carbon Spring Steel Wire tempering can also stabilize its composition and geometry parameters size.
2, carbon spring steel wire quenching, the internal stress is relatively large, resulting in carbon spring steel elastic effect decreased, Carbon Spring Steel Wire tempering can improve the elastic effect of Carbon Spring Steel Wire.
3, Carbon Spring Steel Wire tempering, the mechanical properties of the effect is relatively low, through the Carbon Spring Steel Wire tempering can greatly improve its mechanical properties.
Steel wire is generally used to apply tension, so require a strong tensile strength and better mechanical properties, the heat treatment of steel wire is to achieve this goal. At the same time, the wire manufacturing process will produce a certain internal stress or tissue stress, the use of steel to play a negative reaction, heat treatment is to eliminate the internal stress.
Carbon Spring Steel Wire is a wire used for spring (SPRING) or wire type (WIRE FORM). In accordance with the different spring use, the spring required to do a variety of types of carbon spring steel wire, such as the requirements of the lower mattress spring carbon spring steel wire (referred to as mattress wire), do shock absorbers Carbon Spring Steel Wire.
Carbon spring steel wire heat treatment method is a steel composite strengthening method, that is, carbon steel or low alloy steel and other Carbon Spring Steel Wire in a continuous production line heating to AC3 + (100 ~ 250) ℃, immediately into the Pb-Bi alloy tank Cooling, and then through the drawing die deformation, and then into the oil tank quenching, and after the flow of particles furnace tempering. The carbon spring steel wire heat treatment equipment according to the present invention is composed of a lubricant-to-electrode combination device, a deformation quenching device and a flow particle tempering furnace. To overcome the old method of drawing deformation often broken wire, the product surface quality is poor, uneven performance and other defects.

Copyright © Henan Friend Metal Products Co.,Ltd All rights reserved.
QR Code