Email:cnfuruide@gmail.com Henan Friend Metal Products Co.,Ltd

Henan Friend Metal Products Co.,Ltd

How To Extend The Service Life Of Spring Steel Wire

How to extend the service life of Spring Steel Wire

Spring steel wire has the same qualities, and many other iron objects, such as common a kitchen knife in the air will rust, later will also touched water rust, long time not to use a kitchen knife will become a pair of rust corrosion, Spring Steel Wire, too, if you accidentally touch the water, it will produce rust, rusty iron wire is known to all, if you only have a little rust then it won't keep using, if rust is badly is very serious, so its quality problems, in the process of use will appear a lot of problems. Therefore spring steel wire needs good maintenance and maintenance.

Spring Steel Wire is also known as hot dip zinc and hot dip galvanizing: it is an effective metal embalming method, mainly used in metal structure facilities in various industries. Is around 500 ℃ after cleaning of steel in liquid zinc melting, the zinc layer adhered on the surface of the steel members, which have the purpose of corrosion.

Spring Steel Wire manufacturer tells you the coating of galvanized wire can see whether the quality of galvanized wire is good or not. If the strength of zinc attached to wire is very poor, Spring Steel Wire then Spring Steel Wire manufacturer tells you that this kind of galvanized wire is best not to buy, because this kind of galvanized wire must be of poor quality galvanized wire.

Spring steel wire manufacturer to tell you that high quality galvanized wire normally attached on the surface of the wire, zinc layer is thick, so everyone at the time of purchase of spring steel wire as long as see the thickness of the zinc layer machine can largely determine the quality of the spring steel wire is a high-grade.

The galvanizing line is the reaction of the alloy layer of molten matrix metal and iron, thus the combination of the substrate and the coating. Galvanized wire is first pickling, iron oxide, in order to remove the surface of the metal wire, pickling, Spring Steel Wire through cleaning tank solution or ammonium chloride or zinc chloride and zinc chloride mixed aqueous solution, and then into the hot dipping tank. Hot galvanizing has the advantages of uniform coating, strong adhesion and long service life.

The hot spring steel wire plate occurs with the complex physical and chemical reaction of the molten pool, Spring Steel Wire forming a tight layer of corrosion-resistant zinc-iron alloy structure. Alloy layer and pure zinc layer, wire substrate integration. Therefore, its corrosion resistance is strong.

Spring steel wire galvanizing, zinc plating is very few, only 10-50g/square meter, its own hot galvanizing wire's corrosion resistance ratio is much different. Formal galvanized steel wire manufacturer, in order to ensure quality, most do not adopt electrogalvanizing (cold plating).

Only the small, outdated equipment and the use of small businesses galvanized, and of course their prices are relatively cheap. At present, the ministry of construction has officially made the following, the technology behind the spring steel wire technology is backward, the galvanized wire is not allowed to use the cold water, Spring Steel Wire the gas wire. The galvanized layer of spring steel wire is electroplated, independent layered zinc layer and wire substrate. The thin layer of zinc, the zinc layer simply adheres to the wire substrate, easily falls off. Therefore, Spring Steel Wire its corrosion resistance is poor. In the new house, it is forbidden to use cold-water Spring Steel Wire as a wire.


Copyright © Henan Friend Metal Products Co.,Ltd All rights reserved.
QR Code