Gi Wire 2.2 mm Lightly Galvanized Low Carbon Chicken Wire for Hexagonal Wire
We take pleasure in an extremely fantastic standing among the our prospects for our great product top quality, competitive cost and the finest support for Valve alloy spring steel wire ASTM-A401, spring steel wire82B JIS G3561, 65Mn spring wire JIS G3561. We sincerely hope that we can establish long-term and stable cooperative relations with customers at home and abroad on the basis of mutual benefit and common development. With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees. We can customize the products according to your requirements and we can pack it for you when you order.
Shaped steel wire (spring washer with trapezoidal wire)
Use：
This product is suitable for the manufacture of standard spring washers with trapezoidal wire.
Classification and code：
Cold drawing: L Annealing: T Flat bottom: Pd Arc bottom: Hd
B-nominal height; H-trapezoidal height; L-trapezoidal bottom length; D-trapezoidal diagonal; r-fillet radius;
Column: The sectional shape shall be indicated in the contract
Mechanical properties
delivery status | Mechanical properties（Brand 65mn) | |
tensile strength，Kgf/(N/mm) | Brinell hardness HB | |
annealing | 60~80（588~784） | 157~217 |
Cold drawing | 85~110（833~1078） | 241~310 |
Surface Quality
The surface of the steel wire shall be smooth and shall not be cracked, corroded, folded and oxidized. The local scratches and individual dimples shall be allowed to exist where the depth does not exceed half of the allowable deviation of the H dimension, Annealed steel wire surface allows oxidation color.
Decarburization layer
The depth of the total decarburized layer (ferrite + transition layer) on one side of the steel wire is not more than 2.0% H and the decarburized layer
Form of delivery
Delivered in coil form
Shaped steel wire (spring washer with trapezoidal wire)
Size, shape and tolerances （Standard washers for wire）
Specifications Model | Wire size | |||||||||
b, | H,mm | L,mm | D,mm | A, degrees | r, | |||||
Size | Allowable deviation | Size | Allowable deviation | biggest size | smallest size | angle | Allowable deviation | |||
TD1.0 | 1.0 | 1.01 | -0.10 | 1.05 | -0.10 | 1.39 | 1.31 | 5.0 | -0.5 | 0.25b |
TD1.2 | 1.2 | 1.21 | -0.10 | 1.25 | -0.10 | 1.67 | 1.59 | 5.0 | -0.5 | 0.25b |
TD1.6 | 1.6 | 1.62 | -0.10 | 1.65 | -0.10 | 2.21 | 2.12 | 5.0 | -0.5 | 0.25b |
TD2.0 | 2.0 | 2.02 | -0.10 | 2.10 | -0.10 | 2.80 | 2.71 | 4.5 | -0.5 | 0.25b |
TD2.5 | 2.5 | 2.52 | -0.10 | 2.60 | -0.10 | 3.48 | 3.38 | 4.5 | -0.5 | 0.25b |
TD3.0 | 3.0 | 3.03 | -0.10 | 3.10 | -0.10 | 4.17 | 4.07 | 4.5 | -0.5 | 0.20b |
TD3.5 | 3.5 | 3.53 | -0.12 | 3.65 | -0.12 | 4.88 | 4.77 | 4.5 | -0.5 | 0.20b |
TD4.0 | 4.0 | 4.03 | -0.12 | 4.15 | -0.12 | 5.57 | 5.46 | 4.5 | -0.5 | 0.20b |
TD4.5 | 4.5 | 4.54 | -0.12 | 4.70 | -0.12 | 6.31 | 6.19 | 4.0 | -0.5 | 0.20b |
TD5.0 | 5.0 | 5.04 | -0.12 | 5.20 | -0.12 | 7.00 | 6.88 | 4.0 | -0.5 | 0.20b |
TD6.0 | 6.0 | 6.05 | -0.12 | 6.30 | -0.12 | 8.44 | 8.30 | 4.0 | -0.5 | 0.20b |
TD6.5 | 6.5 | 6.55 | -0.15 | 6.80 | -0.15 | 9.12 | 8.98 | 4.0 | -0.5 | 0.20b |
TD7.0 | 7.0 | 7.06 | -0.15 | 7.40 | -0.15 | 9.88 | 9.73 | 4.0 | -0.5 | 0.18b |
TD8.0 | 8.0 | 8.06 | -0.15 | 8.40 | -0.15 | 11.25 | 11.10 | 4.0 | -0.5 | 0.18b |
TD9.0 | 9.0 | 9.07 | -0.15 | 9.50 | -0.15 | 12.69 | 12.53 | 4.0 | -0.5 | 0.18b |
(Light washer wire)
Specifications Model | Wire size | |||||||||
b, | H,mm | L,mm | D,mm | A, degrees | r, | |||||
Size | Allowable deviation | Size | Allowable deviation | biggest size | smallest size | Angle | Allowable deviation | |||
TD1.0x0.8 | 1.0 | 1.01 | -0.10 | 0.85 | -0.10 | 1.28 | 1.20 | 4 | -0.5 | 0.25b |
TD1.2x0.8 | 1.2 | 1.21 | -0.10 | 0.85 | -0.10 | 1.43 | 1.35 | 4 | -0.5 | 0.25b |
TD1.2x1 | 1.2 | 1.21 | -0.10 | 1.05 | -0.10 | 1.55 | 1.47 | 4 | -0.5 | 0.25b |
TD1.6x1.2 | 1.6 | 1.62 | -0.10 | 1.25 | -0.10 | 1.98 | 1.89 | 4 | -0.5 | 0.25b |
TD2.0x1.6 | 2.0 | 2.02 | -0.10 | 1.65 | -0.10 | 2.54 | 2.45 | 3.5 | -0.5 | 0.25b |
TD2.5x2 | 2.5 | 2.52 | -0.10 | 2.05 | -0.10 | 3.16 | 3.06 | 3.5 | -0.5 | 0.25b |
TD3.5x2.5 | 3.5 | 3.52 | -0.12 | 2.60 | -0.12 | 4.26 | 4.16 | 3.5 | -0.5 | 0.20b |
TD4.0x3.0 | 4.0 | 4.03 | -0.12 | 3.10 | -0.12 | 4.94 | 4.83 | 3.5 | -0.5 | 0.20b |
TD4.5x3.2 | 4.5 | 4.53 | -0.12 | 3.30 | -0.12 | 5.47 | 5.36 | 3 | -0.5 | 0.20b |
TD5.0x3.5 | 5.0 | 5.03 | -0.12 | 3.60 | -0.12 | 6.04 | 5.92 | 3 | -0.5 | 0.20b |
TD5.5x4 | 5.5 | 5.53 | -0.12 | 4.10 | -0.12 | 6.72 | 6.60 | 3 | -0.5 | 0.20b |
TD6.0x4.5 | 6.0 | 6.05 | -0.15 | 4.60 | -0.15 | 7.40 | 7.26 | 3 | -0.5 | 0.20b |
TD6.5x4.8 | 6.5 | 6.55 | -0.15 | 4.90 | -0.15 | 7.97 | 7.83 | 3 | -0.5 | 0.20b |
TD7.0x5.5 | 7.0 | 7.10 | -0.15 | 5.60 | -0.15 | 8.78 | 8.63 | 3 | -0.5 | 0.18b |
TD8.0x6.0 | 8.0 | 8.10 | -0.15 | 6.10 | -0.15 | 9.86 | 9.70 | 3 | -0.5 | 0.18b |
With wide experience and expertise, Friend Metal is engaged in the developing, manufacturing and marketing of elliptical square trapezoidal triangle hexagonal c-shape d-shape non-standard customized spring steel wire ASTM-A230-99, ASTM-A401, EN10270-2, JIS G3561. As a professional manufacturer, we now brings you high quality various steel wires made in China which comes in high strength, well toughness and excellent wearing resistance. We also welcome your customized orders.
Gi Wire 2.2 mm Lightly Galvanized Low Carbon Chicken Wire for Hexagonal Wire are sold at home and abroad and exported to many countries and regions. Warmly welcome customers to discuss cooperation, we sincerely hope to meet your needs. In the past, we were a little-known small company and could only produce a few styles, and then we slowly adapt to the market demand and our products continue to enrich. On the principle of mutual benefit and faithful functioning, we are ready to expand our scope of business and establish sincere relationships with clients from around the world.
You Might Also Like
Send Inquiry