Points for attention in installation of steel wire rope
(1) the rope should be placed on the special bracket when it is unwinding or unwinding, or a steel tube can be used to penetrate the rope hole, and both ends are covered with ropes to lift the rope.
(2) arrangement of the steel wire rope on the drum winding direction on the drum must be based on wire rope twist to the rope, right from left to right and left Niansheng from right to left order, winding should be arranged in order to avoid the phenomenon of winding winding or partial clip.
(3) shear wire rope shear at the cut point two side is 10-20mm with wire tied, strapping length is 1-4 times the diameter of the rope, and the cutting tool cutting.
