Email:cnfuruide@gmail.com Henan Friend Metal Products Co.,Ltd

Henan Friend Metal Products Co.,Ltd

Carbon Steel Wire What Is High Carbon Steel Wire

Carbon Steel Wire What is high-carbon steel wire, high-carbon steel wire after high heat and hardening, with high strength and hardness, high elastic limit and fatigue limit (especially the gap fatigue limit), cutting performance is acceptable, but welding performance and Poor cold plastic deformation.

  Due to high carbon content, water quenching prone to crack, so the use of two-liquid quenching (water quenching + oil-cooled), small cross-section parts used oil quenching. This type of steel is usually quenched by tempering or normalizing at medium temperature or in the surface quenching state. Mainly used in the manufacture of spring and wear parts. Carbon tool steel wire is basically not added alloying elements of high-carbon steel wire, but also the tool wire in the low cost, good hot and cold processing, the use of a wide range of steel. Spring steel wire, including high-carbon steel wire, high-carbon steel wire is a kind of spring wire. Those who can do the spring can be called spring steel wire, and high carbon that is high carbon content.

  Carbon Steel Wire Features: High strength and hardness, high elastic limit and fatigue limit (especially the gap fatigue limit), cutting performance is acceptable, but the welding performance and poor cold plastic deformation.

  Mainly refers to the quality of carbon is less than 2.11% without the intention to join the alloying elements of steel, sometimes referred to as carbon or carbon steel.

  Carbon steel is also called carbon steel, refers to the carbon content of Wc is less than 2.11% of the iron-carbon alloy.

  Carbon steel in addition to carbon also generally contain a small amount of silicon, manganese, sulfur, phosphorus.

  1) Carbon Steel Wire According to the use of carbon steel can be divided into carbon structural steel, carbon tool steel and easy cutting of structural steel three categories, carbon structural steel is divided into engineering construction steel and machine manufacturing structural steel two;

  (2) according to the smelting method can be divided into flat furnace steel, converter steel;

  (3) According to the deoxidation method can be divided into boiling steel (F), killed steel (Z), semi-killed steel (b) and special sedative steel (TZ);

  (WC ≤ 0.25% -0.6%) and high carbon steel (WC> 0.6%), carbon steel can be divided into low carbon steel (WC ≤ 0.25%),

  (Including phosphorus, sulfur is higher), high-quality carbon steel (including phosphorus, sulfur low) and high-quality steel (including phosphorus, sulfur lower (5) according to the quality of steel can be divided into ordinary carbon steel ) And premium grade steel.

  Description: General carbon steel in the higher carbon content is greater hardness, the higher the strength, but the plastic low


Copyright © Henan Friend Metal Products Co.,Ltd All rights reserved.
QR Code